Collection Box is framed with a 1 ” x 1 ” angle iron. All seams are continuously welded. Exterior walls are made of 12ga Sheet Steel. Bracing is made of 12ga Steel and is rated for 100,000 AIC to receive Phase and Neutral Bars on minimum 3“ 600V insulators. The enclosures are primed and painted both inside and out with Sherwin Williams ANSI- 70 Light-Dove Grey.
A ” GPO-3 red insulating material is used to provide protection.
CD 110 Silver Plated Copper is used on all Phase bars, Neutral and Ground bars where applicable. Bars are continuously punched with 9/16 ”holes at 1 3⁄4” each way.
NOTE: Minimum 10 lug spaces provided on customer side
Phase and Neutral Bars are sized to National Electrical Manufacturers Association (NEMA) Standards according to the following formula: One square inch of copper cross section equals 1,000 amps per phase. The Neutral phase is supplied “Full” not half.
Meets NEMA standard for Type 3R (Rainproof and sleet-ice resistant) enclosures. Approved by Austin Energy.
Custom Sizes are available